Conical Compression Springs

Terug naar de homepagina

Conical Compression springs are used if space in axial direction is limited. In conical a compression spring, coils coincide in such a way, that its height at compression is about twice the thickness of the wire. The spring coefficient behaves approximately linear and the length at compression is less than that of normal compression springs. For the calcution of conical compression springs we refer to DIN 2089-1 (NEN 13906-1) and DIN 2095-2. Our engineering department can calculate the right spring for your and give you technical advices.

Concial Standard springs:

Material:
Musicwire:	DIN 17223 C / No. 1.1200 t/m wire 2 mm: EN10270-1:01 DH (bonded) > wire 2 mm : EN10270-1:01 SH
Stainless steel:	DIN 17224 / X10CrNi 18-8 / AISI 302 / No. 1.4310 / EN 10270-3:01
Tolerances:	DIN 2095-2 / DIN 2098-2
Working temperature:	music wire: max. +80 degrees celcius stainless steel: max. +250 degrees celcius For higher temperatures, please take contact with our engineering department
Production:	coiled: right hand ends: squared and ungrounded
Surface treatment:	The springs are oiled. If different surface treatment is requested, a surcharge will be levied. Moreover, this will result in a prolonged delivery time.

Attention: Forces are given for springs made of stainless steel. If music wire is used, an increase in force by 10-15% must be taken into account.

Special Conical Springs:

Our production can almost make every conical spring on measure as well in small quantities as large quantities. We use several kinds of material, such as music wire, stainless steel 302 and 3.16, inconel, titanium, chromium plating, nickel-plating, epoxy coating, passivating, electrolitical polishing, sinking, cleanroom packiging, etc.

For special conical compression springs we ask you to contact our sales engineering department by calling +31.20.6822961 or fill in this form.

Webdesign & CMS by Negeso^®